- LFTIND-DC: 32-36V adjustable vandal-proof industrial photocell with direct current
- LFTIND-09: 12-24V adjustable vandal-proof industrial photocell with alternating and direct currents
- KLFRX photocells are designed to detect obstacles in automatic door facilities, preventing collision with the door. Adjustable industrial photocell with alternating current
Industrial Photocell
MORE INFORMATION ABOUT THIS PRODUCT
Photocell with mirror
FT02 and KLPMRG012 photocells are designed to detect obstacles in automatic door facilities, preventing any collision with the door.
LPR100: Protector for KLPRMG photocell
LER4: Photocell mirror
LPRER4: Protector for mirror LER4
- They comprise a transmitter-receiver module and a mirror
- The module emits an infrared beam which is reflected in the mirror and returns to the module. If the beam does not return to the module, the contacts of cable connectors 3 and 4 change status.
- FT02: 12-24Vdc photocell adjustable every 90° with mirror
- KLPMRG012: 12m multi-voltage photocell with mirror
MORE INFORMATION ABOUT THIS PRODUCT
FT06
- The FT06 photocells are designed to detect obstacles in automatic door facilities, preventing collision with the door
- They comprise an infrared transmitter module (TX) and receiver module (RX)
- If a person or object interrupts the beam of light emitted by the transmitter the receiver enables the corresponding relay and informs the installation control panel
- 12-24 Vac/ 12-36Vdc wall photocell
MORE INFORMATION ABOUT THIS PRODUCT
FT07
Photocells with batteries
- The FT07 photocells are designed to detect obstacles in automatic door facilities, preventing collision with the door
- They comprise an infrared transmitter module (TX) and receiver module (RX)
- If a person or object interrupts the beam of light emitted by the transmitter the receiver enables the corresponding relay and informs the installation control panel
- They also have terminals to connect mechanical or 8k2 resistive safety strips, so the strip can be connected to the transmitter, which sends the strip signal to the receiver, thus avoiding having to wire the strip to the control panel
- The transmitter can be battery powered, to simplify the wiring, especially if it is mounted on the moving leaf and a safety strip is also mounted on this leaf
- FTBAT: 2 AA lithium batteries (Li-SOCL2), 3.6V 2.7Ah
MORE INFORMATION ABOUT THIS PRODUCT
Electric Locks
Proximity keys and cards
Erreka’s TAG system allows activation of 1 relay by means of RFID technology, approaching a key or card to a reader.
- LV9083: Electric lock with adjustable 50-60-70-80 mm cylinder
- LV9083P: Electric lock with adjustable 50-60-70-80 mm cylinder and push button
- LV9087: Electric lock with V90 European profile (without cylinder)
- LV9600: Electric bar lock with European profile (without cylinder)
- LC721: Electric lock with 50-80 mm adjustable cylinder
- LC721M: Electric lock with micro
- LC611: CISA Electric lock with internal push button
- LC611M: Electric lock with micro and internal push button
- LBO20: 220Vac drop-bolt electric lock
- LBE20: 220Vac drop-bolt electric lock with external cylinder
MORE INFORMATION ABOUT THIS PRODUCT
Lumi
Flashing lamp
- The LUMI flashing light (yellow) is used to warn of movement of motorised doors
- When the door moves, the light flashes intermittently to indicate there are moving parts
- The LUMIT light (white) is used as a courtesy light
- Size: ø90x126mm
- Built-in electronics and 433.92 MHz antenna
- Possibility of steady light or flashing light
- Horizontal or vertical mounting
MORE INFORMATION ABOUT THIS PRODUCT
Small Traffic Light
- The LLSD traffic light is a signalling element in motorised door facilities
- Colour lights show whether the door should be crossed or not
- Green light: door open, free passage.
- Red light: door in movement, passage forbidden.
- 230Vac traffic light, two colours red/green
MORE INFORMATION ABOUT THIS PRODUCT
Large Traffic Light
- The LSRV2 traffic light is a signalling element in motorised door facilities
- Colour lights show whether the door should be crossed or not
- Green light: door open, free passage.
- Red light: door in movement, passage forbidden.
- 230Vac 50/60 Hz traffic light, two colours red/green
MORE INFORMATION ABOUT THIS PRODUCT
Technical Manual
Rapid guide LSRV2 89.95 KB
Traffic Light with LED lights
- The SMF01 traffic light is a signalling element in motorised door facilities
- Colour lights show whether the door should be crossed or not
- Green light: door open, free passage.
- Red light: door in movement, passage forbidden.
- 230Vac 50/60 Hz traffic light, two colours red/green
MORE INFORMATION ABOUT THIS PRODUCT
Technical Manual
Rapid guide SMF01 156.69 KB
EPS1-001
Traffic light management card
- The EPS1-001 card allows us to connect traffic lights (or a flashing light) in motorised door facilities
- It is also possible to connect the brakes (CICLON and MAGIC operators) for independent management, using the boards fitted for this purpose (VIVO-M202 and VIVO-M203/M204 and selecting the parameter Ab01)
- The card is inserted in the control board traffic light connector, and the traffic, flashing or brake light is connected to the card
- This card is valid for all ERREKA traffic lights
MORE INFORMATION ABOUT THIS PRODUCT
Technical Manual
Rapid guide EPS1 94.51 KB
Mechanical safety strips for swing and sliding doors
The LM safety strips are designed to be used as additional safety devices in automated gates.
- LM15: 1500x70mm mechanical strip
- LM17: 1700x70mm mechanical strip
- LM20: 2000x70mm mechanical strip
- LM25: 2500X70mm mechanical strip
MORE INFORMATION ABOUT THIS PRODUCT
Mechanical safety strips for up-and-over and sectional doors, shutters and barriers
The LB safety strips are designed to be used as additional safety devices in automated gates.
- LB30: Assembled 3000x30mm mechanical strip (3m rubber, 3×1 aluminium profiles, cable kit and microswitches)
- LB40: Assembled 4000x30mm mechanical strip (4m rubber, 3×1 aluminium profiles, cable kit and microswitches)
- LB60: Assembled 6000x30mm mechanical strip (6m rubber, 3×1 aluminium profiles, cable kit and microswitches)
- LBKIT: Mechanical strip assembling kit up to 10m (without rubber/profiles)
- LBGOM40M: 40m rubber roll for LB safety strips
- LBALU1M: 1m aluminium profile for LB safety strips
MORE INFORMATION ABOUT THIS PRODUCT
Passive safety strips
- NM3515: 35mm rubber (1,5m)
- NM3517: 35mm rubber (1,7m)
- NM3520: 35mm rubber (2m)
- NM3525: 35mm rubber (2,5m)
- NB2520: 25mmx2000mm passive safety strip (up-and-over and sliding doors)
Resistive safety strips
- 15mm PROFILE: 2m, 3m and 4m assembled resistive strips (FLPR15+FLPRAL15, FLPRMONACC)
- 25mm PROFILE: 2m, 3m and 4m assembled resistive strips (FLPR25+FLPRAL, FLPRMONAC)
- 45mm PROFILE: 2m, 3m and 4m assembled resistive strips (FLPR45+FLPRAL, FLPRMONAC)
Force measuring dynamometer
LPRDFZ33: Compact, light and autonomous force measuring dynamometer for automated doors.
Traffic Light Strip
Signalling element for ULTRA barriers. Colour lights show wether the door should be crossed or not.
3m strips:
- LBALU1M09: 1m aluminium profile for LP safety strips
- AUL08: 3m transparent rubber
- AUL09: 3m LED kit
4.5m strips:
- LBALU1M09: 1m aluminium profile for LP safety strips
- AUL04: 4.5m transparent rubber
- AUL06: 4.5m red/green LED kit
6m strips:
- LBALU1M09: 1m aluminium profile for LP safety strips
- AUL03: 6m transparent rubber
- AUL05: 6m red/green LED kit
No olvide que para un correcto uso de su puerta y una larga vida del automatismo es necesario un mantenimiento.
Además de garantizar que tengan las seguridades en regla.