Automatic Sliding Doors

ERREKA automatic sliding doors are designed to cover all the needs of a site and all kinds of pedestrian entrances. We take special care over aspects like design, aesthetics, comfort and accessibility.

Our operators for automatic glass doors are highly reliable and robust, always maintaining their precision of movement and silent operation.

Put the best delivery times on the market to test!

Operators

The entire range of ERREKA sliding doors consists of high quality products with the best components on the market and designed for heavy traffic. Their main feature is the modularity of the product, with the same operator using an arm system and an electronic space reader we can automate entrances with different accesses. This sets us apart from the competition, offering the best delivery times in Europe and avoiding on-site errors. Our operators also stand out for being silent.

We test 100% of our operators during at least 20 minutes in our factory so we guarantee the highest levels of quality and reliability.

In compliance with European Standard EN16005

Ertain4

The sliding door model ERTAIN, with high-quality finish, adapts to the installation’s different needs and it is the recommended operator for most installations.

It is designed for heavy traffic flow situalions both for large facilities (supermarkets, hotel, airports, hospitals…) and medium and small facilities (offices, pharmacies, restaurants, shops…).

  • Silent opening/closing movements, dynamic stability and easy and quick installation
  • Modular and versatile (it has the same box profile as the global system)
  • Adaptable to all types of 50mm wide profiles
  • Quick box profile operator installation system using special nuts
  • Extremely strong carrier fitted with three nylon wheels guided between safe tracks that prevent derailment
  • Motor force control system with automatic reversion for user’s safety
  • Battery powered anti-panic opening system (in case of power supply failure)
  • Simple mechanism that makes maintenance tasks easier
  • PC connection for a centralised door control or programming

MORE INFORMATION ABOUT THIS PRODUCT

Product File 486.58 KB
Other downloads
Declaration of conformity Ertain 4 35.01 KB

Global

The GLOBAL SYSTEM operator is the best choice for your most demanding heavy traffic flow projects. With the same operator, using an arm system, we can automate entrances with different accesses. Its features are tailored to situations and entrance configurations for all types of buildings (supermarkets, hotels, airports, etc.).

  • Flexibility and standardization
  • Modular and versatile (it has the same box profile as the Ertain system)
  • Adaptable to all types of 65mm wide profiles
  • Self-supporting box profile without beam
  • Electric lock fitted with a highly reliable simple effect electric magnet
  • Extremely strong carrier fitted with three nylon wheels guided between safe tracks that prevent derailment. This is the most reliable mechanical system in the market
  • Auxiliary devices protected against overvoltage by electromagnetic switches
  • Battery powered anti-panic opening system (in case of power supply failure)
  • Motor force control system with automatic reversion for users’ safety
  • PC connection for a centralised door control or programming

MORE INFORMATION ABOUT THIS PRODUCT

Product File 427.53 KB
Other downloads
User manual Global 712.92 KB
Declaration of conformity Global 35.01 KB

Telescopic

This door is particularly suitable for reduced spaces where sufficient opening room is required and there is too little space for the sliding door to be installed leaving the desired gap. The two-leaf models are recommendable for shops, interior corridor doors, offices, etc. The four-leaf models are ideal for large-sized accesses, and they are usually installed in car showrooms, shops, hotels, etc.

  • Modular system
  • Quick box profile operator installation system using special nuts
  • Speed division system using a double pulley with a neoprene cog belt
  • Separate high wear-resistant aluminium alloy reller track fixed with adhesive foam tape to absorb the vibration of carriage movemets, thereby reducing noise
  • Auxiliary devices protected against overvoltage by electromagnetic switches
  • Battery powered anti-panic opening system (in case of power supply failure)
  • Motor force control system with automatic reversion for users safety
  • A double door can be installed with a lock system

MORE INFORMATION ABOUT THIS PRODUCT

Product File 536.99 KB
Other downloads
User manual Telescopic 712.92 KB
Declaration of conformity Telescopic 35.01 KB

Door models

We have a wide range of profile systems and types of closings to adapt to any site and project. From bare glass doors that allow full visibility to doors with compact sealability profile systems and energy efficient, panic doors and emergency exits.

In compliance with European Standard EN 16361.

Mordaza Clamp

The MORDAZA CLAMP model allows for maximum visibility of entrances as it is the frameless and thus the one showing more full glass. Therefore, this model provides entrances with an avant-garde and elegant look

  • Due to a non slip material located inside the clamp, this model ensures a secure grip (up to 150kg per leaf)
  • It also offers the advantage that there is no need to drill or work the glass, as the clamp supports it through pressure, making it easy to install or replace the glass
  • We have an additional MORDAZA LONG CLAMP model option, which apparance is similar to the PINZA CLIP model and it is valid for 4+4mm and 5+5mm glasses and leaves with an up to 1.2 metres width

MORE INFORMATION ABOUT THIS PRODUCT

Product File 726.76 KB
Other downloads
Installation drawin Clamp Ertain 2+2 (dwg) 943.35 KB
Installation drawin Clamp Ertain 2+2 (pdf) 52.74 KB
Installation drawin Clamp Global 2+2 (dwg) 986.89 KB
Installation drawin Clamp Global 2+2 (pdf) 59.42 KB
Installation drawin Clamp Ertain 1+1 (dwg) 916.91 KB
Installation drawin Clamp Ertain 1+1 (pdf) 51.72 KB

Pinza Clip

The PINZA CLIP model provides the maximum elegant appearance and visibility to the interior of entrances. It is ideal for situations in which frames would not be suitable for aesthetic reasons, and where a simple glass surface is the best option. This model is ideal for interior entry doors, particularly for offices.

  • There are 2 installation solutions available: with a top and bottom frame or with a top frame and full glass at the bottom
  • Panels from 4+4 to 6+6 can be installed and thet are secured with special silicone
  • The model is supplied with a specially designed plastic cover to ensure that the leaves meet smoothly, leaving a small gap to prevent the panels from knocking against each other and enchancing the look of the clip

MORE INFORMATION ABOUT THIS PRODUCT

Product File 613.99 KB
Other downloads
Installation drawin PINCER Ertain 2+2 (dwg) 1.23 MB
Installation drawin PINCER Ertain 2+2 (pdf) 93.90 KB
Installation drawin PINCER Global 2+2 (dwg) 1.29 MB
Installation drawin PINCER Global 2+2 (pdf) 99.55 KB
Installation drawin PINCER Ertain 1+1 (dwg) 1.21 MB
Installation drawin PINCER Ertain 1+1 (pdf) 93.36 KB
Installation drawin PINCER Telescopic 2+1 (dwg) 563.51 KB
Installation drawin PINCER Telescopic 2+1 (pdf) 115.00 KB

Slim20

The SLIM 20 model has been designed to offer an image of modern and functional access without losing strength.

It is the ideal model for accesses where we want to guarantee medium levels of sealability but with a clear view of the inside, making the glass the focal point, since the profile system is minimal at 20 x 26 mm in the vertical frame and 20 x 55 mm in the horizontal frame.

  • Suitable for all types of entrances at street level such as pharmacies, restaurants and shops.
  • It is very easy to install because it uses the same profile for the frame, guide and housing functions necessary for coupling the moving leaves.
  • This frame allows panels from 4+4 to 6+6, with U-shaped rubber specific to each thickness. This way a stable installation is guaranteed in all cases.
  • Good sealability
  • For moving leaves, the structure is fitted with an overlapped cover profile that is fixed to the wall. Double rubber sealing is also used to guarantee sealability.

MORE INFORMATION ABOUT THIS PRODUCT

Product File 522.15 KB
Other downloads
Installation drawin SLIM20 Ertain 2+2 (dwg) 875.39 KB
Installation drawin SLIM20 Ertain 2+2 (pdf) 154.71 KB
Installation drawin SLIM20 Global 2+2 (dwg) 711.85 KB
Installation drawin SLIM20 Global 2+2 (pdf) 156.58 KB
Installation drawin SLIM20 Ertain 1+1 (dwg) 719.86 KB
Installation drawin SLIM20 Ertain 1+1 (pdf) 169.17 KB
Installation drawin SLIM20 Telescopic 2+1 (dwg) 369.03 KB
Installation drawin SLIM20 Telescopic 2+1 (dwg) 167.67 KB

Eco32

The robust framed profile of ECO 32 model provides maximum sealability, making it the right solution for cases in which energy efficiency is an essential requirement.

This model reaches thermal transmittance values that are unusual for sliding doors, thanks to the overlaps with double rubber sealing and lower brushes for moving door leafs. These levels of thermal transmittance are also achieved with the installation of laminated double glazing.

  • The dimensions of this profile are 32x60mm. It consists of five aluminium profiles, four double rubber seals and floor brush for moving leaves
  • Door leaves are formed by two different frames: two upper and lower horizontal frames and two side frames. Frames are fixed at 90º using two self-tapping screws and one angle support
  • Sealability is ensured thanks to overlapping profiles, double rubber and lower brushes. The double rib closing rubber ensures a better closing that does not move with wind
  • 10 and 12mm glass can be installed, as well as 22 and 24mm double glazing
  • A built-in lock installation is available for the ECO 32 Security profile. A multipoint lock installation is also available for the ECO 32 MULTILOCK profile

MORE INFORMATION ABOUT THIS PRODUCT

Product File 511.67 KB
Other downloads
Drawin_ECO32_1+0_Ertain_3.dwg 685.03 KB
Drawin_ECO32_1+0_ERTAIN_3.pdf 176.98 KB
Drawin_ECO32_1+1_ERTAIN_3.pdf 175.23 KB
Drawin_ECO32_2+0_ERTAIN_3.dwg 659.85 KB
Drawin_ECO32_2+0_ERTAIN_3.pdf 203.83 KB
Drawin_ECO32_22_ERTAIN_3.dwg 841.76 KB
Drawin_ECO32_2+2_ERTAIN_3.pdf 169.38 KB
Drawin_ECO32_1+0_GLOBAL_3.dwg 760.14 KB
Drawin_ECO32_1+0_GLOBAL_3.pdf 177.70 KB
Drawin_ECO32_1+1_GLOBAL_3.dwg 818.67 KB
Drawin_ECO32_1+1_GLOBAL_3.pdf 175.82 KB
Drawin_ECO32_2+0_GLOBAL_3.dwg 678.20 KB
Drawin_ECO32_2+0_GLOBAL_3.pdf 205.84 KB
Drawin_ECO32_2+2_GLOBAL_3.dwg 725.58 KB
Drawin_ECO32_2+2_GLOBAL_3.pdf 170.43 KB
Drawin_ECO32_T_2+0_TELESCOPIC_3.dwg 1.03 MB
Drawin_ECO32_T_2+0_TELESCOPIC_3.pdf 179.58 KB
Drawin_ECO32_T_2+1_TELESCOPIC_3.dwg 931.21 KB
Drawin_ECO32_T_2+1_TELESCOPIC_3.pdf 179.48 KB
Drawin_ECO32_T_4+0_TELESCOPIC_3.dwg 904.48 KB
Drawin_ECO32_T_4+0_TELESCOPIC_3.pdf 167.53 KB
Drawin_ECO32_T_4+2_TELESCOPIC_3.dwg 883.21 KB
Drawin_ECO32_T_4+2_TELESCOPIC_3.pdf 164.97 KB

Compact

The COMPACT model is designed to offer the highest performance in terms of sealability and strength. It is the ideal model for entrances with a heavy traffic flow and through which people are carrying shopping trolleys or suitcases (airports, train stations, supermarkets).

  • This model is fitted wit an overlapped profile that drastically reduces the amount of air that passes through the door when it is closed
  • It allows all types of glasses to be fitted (from stadip to double glazing panes) and as with the whole ERREKA range, fitting is extremely simple (snap-in-system) thus improving the delivery/assembly time
  • The frame measurements are 45mm (width) x 45mm (height)
  • The guide is manufactured in wear-resistant material and with a particularly low friction coefficient
  • As the door opens, the seal also has a rounded-edge overlap which reduces the possibility of damage due to snagging
  • For the sealing of moving leaves, it also has frame with rounded edges and a brush seal, thus making it more airtight and secure
  • The snaping system used also enables the automation and frames to be installed first, inserting the glass afterwards. This simplifies the process, thus saving on labour and time
  • We also supply the COMPACT SENDO profile, which dimensions (45x68mm) provide the structure greater strength

MORE INFORMATION ABOUT THIS PRODUCT

Product File 717.98 KB
Other downloads
Installation drawin COMPACT Ertain 2+2 (dwg) 615.65 KB
Installation drawin COMPACT Ertain 2+2 (pdf) 64.15 KB
Installation drawin COMPACT_22_Ertain_3.dwg 615.65 KB
Installation drawin COMPACT Global 2+2 (dwg) 64.15 KB
Installation drawin COMPACT Global 2+2 (pdf) 64.15 KB
Installation drawin COMPACT Telescopic 2+1 (dwg) 214.44 KB
Installation drawin COMPACT Telescopic 2+1 (pdf 98.39 KB
Drawin_COMPACT_Sendo_22_Ertain_2.dwg 613.31 KB
Drawin_COMPACT_Drawin_Compact_Sendo_2+2_Ertain_2.pdf 62.31 KB
Drawin_COMPACT_Slim_22_Ertain_2.dwg 1.01 MB
Drawin_COMPACT_Slim_2+2_Ertain_2.pdf 62.25 KB

Panic Breakout

The push-bar PANIC BREAKOUT system turns the sliding door into a swing door, providing the largest possible opening to allow pedestrians a free exit area in case of emergency.

This model is highly suitable for any type of heavy traffic flow access when sudden evacuation may be required, and it is an added value for accesses where a large space for transit may be needed at certain times (e.g. car showrooms).

  • This model has two options: The integral panic breakout system, with a swing opening of all leaves (fixed and moving); and the moving leaves system which, as its name suggests, only allows these leaves to turn into swing doors.
  • The frame is 45mm (width) x 68mm (height), which added to the metal fittings which allow for folding, make the whole door very robust, thus ensuring the safety of the user should when the doors be pushed in the event of an emergency
  • It includes overlapping frames and sealing to ensure airtightness
  • The glazing is snapped in and allows for the installation of glass panels from 3+3 to 5+5mm

MORE INFORMATION ABOUT THIS PRODUCT

Product File 610.32 KB
Other downloads
Panic_break_out_1+1_Ertain_2.dwg 1,014.08 KB
Panic_break_out_1+1_Ertain_2.pdf 65.34 KB
Panic_break_out_2+2_Ertain_2.dwg 1.04 MB
Panic_break_out_2+2_Ertain_2.pdf 71.81 KB
Installation drawin PANIC BREAK OUT Global 1+1 (dwg) 601.03 KB
Installation drawin PANIC BREAK OUT Global 1+1 (pdf) 195.24 KB
Installation drawin PANIC BREAK OUT Global 2+2 (dwg) 606.97 KB
Installation drawin PANIC BREAK OUT Global 2+2 (pdf) 208.83 KB

Automatic Swing Doors

The Evolution and Smart range of swing doors, all with the same stylish outer housing, is designed to guarantee complete accessibility solutions and entrances.

We cover all automation needs of both existing swing doors and new installations of doors in small spaces.

Operators

The EVOLUTION and SMART models are electromechanical operators for swing pedestrian doors. They can be used to automate existing swing doors or new installations. Their main features are robustness and silent movement. They can be used both indoors and outdoors and for single or double doors. They can be mounted on either side, as they can be integrated in any environment due to their design.

These models have many applications, particularly private or public accesses for disabled people or establishments with heavy traffic flow and limited space. They favour very high sealability and therefore high energy efficiency. They have an extensive and varied range of accessories to make user safety paramount.

Premis

Erreka launches PREMIS, a new automatic operator for swing doors conceived to offer the highest performance on the market.

This new operator is designed for intensive and continuous use. It can be used in Low Energy or Full Energy mode, and can be installed in both existing swing doors and new installations up to 200kg.

It can be used both indoors and outdoors (single or double doors). It can also be mounted on either side, with a pushing or a pulling arm system. Its small design of 75mm of height and easy installation make PREMIS an ideal operator as it can be integrated in any environment.

The wide range of features of the PREMIS 200 operator allows adaptation to meet any installation requirements, including complete automatic mode, push and go, and access control.

MORE INFORMATION ABOUT THIS PRODUCT

Product File 1.24 MB
Other downloads
User manual 329.16 KB

Evolution and Smart

The EVOLUTION and SMART models are electromechanical operators for pedestrian swing doors. They can be used to automate existing swing doors or swing doors or new installations.

  • Their main features are robustness and silent movement
  • They can be used both indoors and outdoors and for single or double doors They can also be mounted on either side, as they can be integrated in any environment due to their design
  • These models have many applications, particularly private or public entrances for disabled people or establishments with heavy traffic flow and limited space
  • They favour very high sealability and therefore high energy efficiency. They have an extensive and varied range of accessories to make user safety paramount
  • Their wide range of features allows great adequacy to any client’s needs
  • In addition to the usual “Push and go”, exit only, etc., other features they offer are courtesy fuction for the disabled, and an automatic increase in the opening and closing force in case of windy weather
  • Possibility of increasing the standby time in case of heavy traffic flow or simply deactivating the automatic operation and using the doors as a manual swing door when necessary

MORE INFORMATION ABOUT THIS PRODUCT

Product File 456.25 KB
Other downloads
User manual 3.52 MB
Evolution CE conformity 216.06 KB

See also the necessary accessories to complete your door automation

Control Panels
Control panels for user-automation communication

Receivers and Transmitters
Transmitters for remote door opening

Opening Accessories
Opening accessories for tailored automation

Safety and Signaling
Safety accessories for risk reduction

×